ERBA XL-200

Power supply: 220VAC, 600VA. The analyzer has a separate cooling switch and analyzer switch. Last inspection 06.12.2022 Software version: MultiXL v2016.02.01. The lack of a mouse and communication cable with the analyzer (USB-Printer) has been supplemented. Instead of 2 missing canisters (WASTE CAN, BIO-HAZARD CAN), one canister with a reed switch sensor and double hose inputs has been supplemented. The analyzer is adapted to work with a pressurized water source (equipped with a module with a solenoid valve). Disassembly and maintenance of the inside and outside surfaces of the analyzer and PC. Supplementation of the missing rear screws and horizontal covers. Replacement of both gas springs of the top cover (Krosno, FA21052.00 130N, should be 120N). The front cover cracked in the middle (it is slightly visible) was reinforced from the inside with metal mesh and epoxy glue. The torn screw sockets of the horizontal covers were glued with metal mesh and epoxy glue. The sampling needle was slightly bent - straightened. Missing power cables were replaced (3 pcs.). The screw caps of the horizontal plates were replaced (10 out of 11, white instead of gray). The missing monitor leg was replaced. The pressurized water dosing module (power supply, solenoid valve, 2 reed sensors) - functional). The PC establishes communication with the analyzer as expected.